Alexander Woesz

Publications:

2008:

[24] OVERVIEW OF BIOCERAMICS, A. Woesz and S. M. Best, in „Cellular Response to Biomaterials„, L. Di Silvio (ed.), 2008 Woodland Publishing Ltd, UK

[23] RAPID PROTOTYPING TO PRODUCE POROUS SCAFFOLDS WITH CONTROLLED ARCHITECTURE FOR POSSIBLE USE IN BONE TISSUE ENGINEERING, A. Woesz, in „Virtual Prototyping and BioManufacturing in Medical Applications„, B. Bidanda and P. Bartolo (eds.), 2008 Springer Science and Business Media, LLC, 171-206

[22] GEOMETRIC REGULATIONS OF THREE DIMENSIONAL TISSUE FORMATION IN VITRO, Monika Rumpler, Alexander Woesz, John W. C. Dunlop, Joost T. van Dongen and Peter Fratzl, submitted 2007

2007:

[21] THREE-DIMENSIONAL GROWTH BEHAVIOUR OF OSTEOBLASTS ON BIOMIMETIC HYDROXYLAPATITE SCAFFOLDS, M. Rumpler, A. Woesz, F. Varga, I. Manjubala, P. Fratzl, J Biomed. Mater. Res. A, 81A, 1, 40-50, 2007

[20] HIERARCHICAL ASSEMBLY OF THE SILICEOUS SKELETAL LATTICE OF THE HEXACTINELLID SPONGE EUPLECTELLA ASPERGILLUM, James C Weaver, Joanna Aizenberg, Georg E Fantner, David Kisailus, Alexander Woesz, Peter Allen, Kirk Fields, Michael J Porter, Frank W Zok, Paul K Hansma, Peter Fratzl, J Struct Biol., 158(1), 93-106, 2007

2006:

[19] MICROMECHANICAL PROPERTIES OF BIOLOGICAL SILICA IN SKELETONS OF DEEP SEA SPONGES, Alexander Woesz, James Weaver, Murat Kazanci, Yannicke Dauphin, Joanna Aizenberg, Daniel Morse and Peter Fratzl, Journal of Materials Research, Vol. 21, No. 8, 2068-2078, 2006

[18] INFLUENCE OF IRREGULARITIES ON THE PERFORMANCE OF 3D OPEN CELL STRUCTURES, M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl and H.E. Pettermann, Proceedings of the III European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, C.A. Mota Soares et.al. (eds.), Lisbon, Portugal, 2006

[17] DESIGNING BIOMIMETIC SCAFFOLDS VIA RAPID PROTOTYPING TECHNIQUES, I. Manjubala, Alexander Woesz, Monika Rumpler, Peter Fratzl, Proceedings of the XVI National conference of SBAOI, NewDelhi, India, 2006

2005:

[16] TOWARDS BONE REPLACEMENT MATERIALS FROM CALCIUM PHOSPHATES VIA RAPID PROTOTYPING AND CERAMIC GELCASTING, A. Woesz, M. Rumpler, J. Stampfl, F. Varga, N. Fratzl-Zelman, P. Roschger, K. Klaushofer and P. Fratzl, Mat. Sci. Eng. C, 25 (2), 181-186, 2005

[15] THE INFLUENCE OF THE THERMAL TREATMENT OF HYDROXYLAPATITE SCAFFOLDS ON THE PHYSICAL PROPERTIES AND THE BONE CELL INGROWTH BEHAVIOUR, Alexander Woesz, Monika Rumpler, Inderchand Manjubala, Christine Pilz, Franz Varga, Juergen Stampfl and Peter Fratzl, Mat. Res. Soc. Symp. Proc. 874, L7.9.1, 2005

[14] BIOMIMETIC MINERAL-ORGANIC COMPOSITE SCAFFOLDS WITH CONTROLLED ARCHITECTURE, I. Manjubala, Alexander Woesz, Christine Pilz, Monika Rumpler, Nadja Fratzl-Zelman, Paul Roschger, Jurgen Stampfl and Peter Fratzl, J. Mat. Sci, Mat. in Medicine, 16, 1111-1119, 2005

2004:

[13] CELLULAR SOLIDS BEYOND THE APPARENT DENSITY - AN EXPERIMENTAL ASSESSMENT OF MECHANICAL PROPERTIES, A. Woesz, J. Stampfl, P. Fratzl, Adv. Eng. Mat., 6 (3), 134-138, 2004

[12] RAPID PROTOTYPING ZELLULÄRER MATERIALIEN, A. Woesz, PhD-thesis, University of Minings, Leoben, 2004

[11] WATER SOLUBLE, PHOTOCURABLE RESINS FOR RAPID PROTOTYPING APPLICATIONS, J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska, H. Gruber, Macromolecular Symposia, Volume 217, Issue 1 , Pages 99 - 108, 2004

[10] FABRICATION AND MOULDING OF CELLULAR MATERIALS BY RAPID PROTOTYPING, J. Stampfl, H. Foad, S. Seidler, R. Liska, F. Schwager, A. Woesz and P. Fratzl, Int. J. Materials and Product Technology, 21 (4), 285-296, 2004

[9] REGULAR, LOW DENSITY CELLULAR STRUCTURES - RAPID PROTOTYPING, NUMERICAL SIMULATION, MECHANICAL TESTING, J. Stampfl, M.M. Seyr, M.H. Luxner, H.E. Pettermann, A. Woesz and P. Fratzl, in: Biological and Bioinspired Materials and Devices, edited by Joanna Aizenberg, William J. Landis, Christine Orme, and Rizhi Wang, Mater. Res. Soc. Symp. Proc. 823, W8.8, 2004

[8] PHYSICAL AND MATERIALS ASPECTS OF PHOTONIC CRYSTALS FOR MICROWAVES AND MILLIMETRE WAVES, R. Gajic, F. Kuchar, R. Meisels, J. Radovanovic, K. Hingerl, J. Zarbakhsh, J. Stampfl and A. Woesz, Zeitschrift für Metallkunde, 95 (7), 618-623, 2004

2003:

[7] RAPID PROTOTYPING BIOMIMETISCH GESTALTETER MATERIALIEN, A. Wöß, J. Stampfl, P. Fratzl, Verbundwerkstoffe (Hrsg,: H.P. Degischer), 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, DGM-Tagung, 785-789, (2003)

[6] RAPID PROTOTYPING - A ROUTE FOR THE FABRICATION OF BIOMIMETIC CELLULAR MATERIALS, J. Stampfl, R. Cano Vives, S. Seidler, R. Liska, F. Schwager, H. Gruber, A. Wöß, P. Fratzl, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, (Eds: P.J. Bartolo, G. Mitchell et al.), 659-666, (2003)

[5] MECHANISCHE EIGENSCHAFTEN VON DURCH RAPID PROTOTYPING HERGESTELLTEN ZELLULAREN MATERIALIEN, J. Stampfl, A. Wöß, S.Seidler, 9. Problemseminar „Deformation und Bruchverhalten von Kunststoffen„, CD-ROM, (Hrsg. W. Grellmann), (2003)

[4] A NEW ROUTE FOR THE FABRICATION OF BIOMIMETIC CELLULAR MATERIALS, R. Liska, F. Schwager, A. Wöß, A. Pisaipan, S. Seidler, J. Stampfl, Proceedings Rad Tech 2003, 193-201, (2003)

2002:

[3] OBJECT RECONSTRUCTION AND OBJECT CONSTRUCTION: APPLICATIONS IN MATERIAL SCIENCE, J. Stampfl, A. Wöß, O. Kolednik and P. Fratzl, Recent Res. Devel. Applied Phys., 5, 89-106, (2002)

[2] RAPID PROTOTYPING OF CERAMIC AND POLYMERIC CELLULAR MATERIALS, J. Stampfl, A. Wöß, P. Fratzl and S. Seidler, IFMBE Proceedings EMBEC'02 (eds: H. Hutten and P. Kräsl), 3(1), 172-173, (2002)

2001:

[1] HERSTELLUNG FASERVERSTÄRKTER ALUMINIUMSCHÄUME, A. Wöß, diploma thesis, University of Minings, Leoben, 2001

Presentations at international conferences:

[14] BIOCERAMIC NANOPARTICLE REINFORCED BIOPLOYMERS - DGBM annual meeting, Hannover, Germany, 22-24 November 2007

[13] BIOCERAMIC NANOPARTICLE REINFORCED BIOPLOYMERS - Simha Symposium on Polymer Physics and Polymer Nanocomposites, Montreal, Canada, 17-19 October 2007

[12] POROUS BONE REPLACEMENT MATERIALS, 2nd Vienna Biomaterials Symposium, Vienna, Austria, 22-24 November 2006 (invited)

[11] MICROMECHANICAL PROPERTIES OF BIOLOGICAL SILICA OF DEEP SEA SPONGES, Mini-Symposium on Metamaterials in Nature and Technology, Windermere, UK, 21-24 August 2006 (invited)

[10] RAPID PROTOTYPING FOR THE STUDY OF MECHANICAL PROPERTIES OF CELLULAR SOLIDS, Workshop on Designing Non-Traditional Materials Based on Geometrical Principles, Hannover, Germany, 19-22 June 2005 (invited)

[9] RAPID PROTOTYPING OF CELLULAR MATERIALS, Alumni Meeting MPI of Colloids and Interfaces, Potsdam, Germany, 27 May 2005

[8] CELLULAR BONE REPLACEMENT MATERIALS WITH DESIGNED ARCHITECTURE, MRS Spring Meeting, San Francisco, USA; 28 March-1 April 2005

[7] THE INFLUENCE OF THE THERMAL TREATMENT OF HYDROXYLAPATITE SCAFFOLDS ON THE PHYSICAL PROPERTIES AND THE BONE CELL INGROWTH BEHAVIOUR, DPG-Frühjahrstagung, Berlin, Germany, 4-9 March 2005

[6] GROWTH OF BONE CELLS ON HYDROXYLAPATITE SCAFFOLDS WITH CONTROLLED ARCHITECTURE, International Symposium on Inorganic and Environmental Materials, Eindhoven, The Netherlands, 18-21 October 2004

[5] RAPID PROTOTYPING OF DESIGNED POROUS CERAMIC SCAFFOLDS, Nato Advanced Study Institute (ASI), Alvor, Portugal, 13-24 October 2003

[4] RAPID PROTOTYPING ZUR HERSTELLUNG PORÖSER KNOCHENERSATZWERKSTOFFE AUS HYDROXYAPATIT, Materialica, Munich, Germany, 16-18 September 2003 (invited)

[3] RAPID PROTOTYPING BIOMIMETISCH GESTALTETER MATERIALIEN, DGM-Conference "Verbundwerkstoffe und Werkstoffverbunde", Vienna, Austria, 2-4 July 2003

[2] RAPID PROTOTYPING ZELLULÄRER MATERIALIEN, Tuesday Seminar of the Austrian Research Centres Seibersdorf, Seibersdorf, Austria, 15 April 2003

[1] ERGEBNISSE DER DRUCKVERSUCHE AN MITTELS RAPID PROTOTYPING GEFERTIGTEN REGELMÄSSIGEN ZELLULÄREN STRUKTUREN - PRÄSENTATION UND ERKLÄRUNGSVERSUCH, Materialphysikalisches Symposium, Seggau, Austria, 5-7 July 2002

Poster-presentations at international conferences:

[7] BIOCERAMIC NANOPARTICLE REINFORCED BIOPLOYMERS - DGBM annual meeting, Hannover, Germany, 22-24 November 2007

[6] BIOCERAMIC NANOPARTICLE REINFORCED BIOPOLYMERS, 21st European Conference on Biomaterials, Brighton, 9-12 September 2007

[5] MICROMECHANICAL PROPERTIES OF BIOLOGICAL SILICA, Bio-Systems, Berlin, 26-29 June 2006

[4] MECHANICAL PROPERTIES OF UNIT-CELL BASED CELLULAR MATERIALS - EXPERIMENTAL RESULTS AND SIMULATION, Porous Metals and Metal Foaming Technology, Metfoam 2005, Kyoto, Japan, 21-23 September 2005

[3] PRODUCTION AND MECHANICAL PROPERTIES OF DESIGNED POROUS CERAMIC SCAFFOLDS, Frühjahrstagung des Arbeitskreises Festkörperphysik der DPG, Regensburg, Germany, 8-12 March 2004

[2] MECHANICAL PROPERTIES OF PERIODIC CELLULAR SOLIDS - AN EXPERIMENTAL ASSESSMENT, Porous Metals and Metal Foaming Technology, Metfoam 2003, Berlin, Germany, 23-25 June 2003

[1] RAPID PROTOTYPING BIOMIMETISCH GESTALTETER MATERIALIEN, 52. Jahrestagung der ÖPG, Leoben, Austria, 23-26 September 2002